It is important to hang frames securely, using appropriate supplies and techniques. There are different methods you can use depending on the application. Read on for specific examples.
To Hold Heavy Mirrors
Avoid the use of picture wire. Hang directly from strap hangers (a loop over a flat plate that screws into the frame). Rather than traditional wall hooks, use wall anchors such as Molly Bolts, that go through the sheet rock and lock into it.
To Prevent Theft
Security Hangers are available that firmly hold all sides of the frame in place on the wall. A special key tool is needed to lock it and again to unlock it. These are generally used in public places but are also good where the frame may easily be bumped.
To Protect Kids
In a kid’s room where things are thrown around, use Security Hangers. If you don’t have access to them, try strap hangers on each side of the frame and heavy duty hooks in the wall for the hanger to sit into. Do not rely on just nails in the wall as they can fall out of the wall or the frame can jump off the nail if something is thrown at it.
To Avoid Crooked Frames on the Wall
When frames are hung from a single point, they usually shift on the wall over time. Both for safety and also to keep frames straight, always hang everything from two points. On heavier pieces this also helps distribute the weight.
To Keep Frames Flush to the Wall
Screw eyes that are often used to attach wire to the frame tend to make the frames lean out from the wall more than they need to. Also, excess slack in the wire can cause the top to lean out. By switching to strap hangers, you can overcome both problems. These hangers are flatter and give you the option of hanging directly from the hanger versus using wire.It is a good idea to be overly cautious when hanging framed pieces. Wall hooks support different amounts of weight. It is OK to use hooks that hold more weight than what you are hanging.